| |
|
|
|
| |
|
Specifications -- FM500
|
|
|
FreeMount FM500 system comprises of FM-501 access panel, FM-502 outlet panel, FM-Pedestal, FR-Pedestal, and all necessary accessories.
|
| |
|
System: Netfloor FreeMount FM500
Module set: 500mm x 500mm
System height: 75mm ~ 200mm
System weight: avg. 36 ~ 38 kg / per sq. meter
Flammability: non-combustible
Loading property:
|
|
|
|
Concentration load
|
Concentrate ultimate load
|
uniform load
|
|
FM500-3000
|
3.0 kN < 2.5mm depression
|
> 6.0 kN
|
12 kN / m2
|
|
FM500-4500
(Special Run)
|
4.5 kN < 2.5mm depression
|
> 9.0 kN
|
20 kN / m2
|
|
| |
|
Main Components:
|
|
|
FM501
|
|
access panel:
size 500mm x 500mm, thickness 28mm, welded form full steel, top plate 0.6mm thickness, bottom plate 0.6mm thickness, corrosion resistance treatment by powder-coating. 4mm radius notch at angles of the panel.
|
|
|
|
FM502
|
|
outlet panel:
size 500mm x 500mm, thickness 28mm, with 23mm x 26mm opening at two sides. Welded form steel cementitious access panel, corrosion resistance treatment by powder coating. 4mm radius notch at angles of the panel. For office and school application, standard composition of access panels is 9 x FM501 plus 1 x FM502, i.e. one piece FM502 for 2.5 sq. meters.
|
|
|
|
FM-lid:
FM_lid
|
|
to conceal openings at 2-sides of FM-502, and as exit for cables extension from access floors.
Made of re-enforced polycarbonate plus ABS. Each FM-lid shall be capable to exit five 5mm diameter data wires, or two 7mm diameter power cable.
|
|
|
|
FM-Pedestal: consists of headset and column-set
|
| |
|
headset:
|
|
aluminum headset for corner-locking by access panels. Rubber-pad at top, and 6mm hollow hexagon socket-set-screw embedded at upper inside.
|
|
| |
|
column-set:
column_set
| |
16mm diameter special steel stud, by 5mm hexagon notch at top of the column. 11mm height half cone-shape plastics at bottom, holding by flat-head screw which locking onto steel stud at bottom.
|
|
|
|
FR-pedestal:
FR_pedestal
|
|
aluminum headset for corner-locking by access panels.
Rubber-pad at top, and 6mm hollow hexagon socket-set-screw embedded at upper inside.
|
|
|
|
Height adjustment:
By using 5mm hexagon key wrench to adjust from top.
|
|
|
|
System fastening:
By using 6mm hexagon key wrench to fasten socket-set-screw onto column-set mechanically from top.
|
|
|
|
Accessories:
Utility floor box, PVC trim to seal cutting panel, fastening screw, and all accessories shall be supplied by the manufacturer or approved equivalent.
|
|
|
|
Applications:
The system shall be light-weight, non-glue to sub-floors, fastening and height adjusting above the access floors, and be suitable to install on all type hard or resilient sub-floors such as concrete slab, PVC tile, sheet vinyl, granite, marble, ceramic tile, and etc.
|
| |
|
Environment Protection:
The system shall be non-glue installation, non-pollution to sub-floors. In the event of re-location, the system shall be 100% re-usable, and no pollution, no damage to original sub-floor.
|
| |
|
Floor Coverings:
Floor coverings shall be commercial rate modular carpet tile, or commercial rate vinyl tile thickness not less than 4.5mm.
|
| |
|
|
|
|
Copyright Netfloor, Inc. All Rights Reserved.
|