|
|
|
|
|
|
|
II. CamassCrete Super Low-Profile
|
40 mm / 50 mm / 60 mm H
|
|
| |
|
Super-Low Cable Highway ------ Can only be built by Netfloor Systems
|
|
|
CS1000A-40 / CS1000A-50 / CS1000A-60 SERIES
|
|
|
Cable Trench Capacity by different heights
Inside width: 110 mm (4.33")
Clearance: System height minus 5 mm
|
|
|
|
Socket-Set-Crew fixed
at top of the pedestal
|
|
| |
|
System |
|
System
Height |
|
Cable
Trench
width |
|
Cable
Trench
Clearance |
|
CS1000A-40 |
|
40 mm |
(1.57") |
|
110
mm |
(4.33") |
|
35 mm |
(1.37") |
|
CS1000A-50 |
|
50 mm |
(2.0") |
|
110 mm |
|
|
45 mm |
(1.77") |
|
CS1000A-60 |
|
60 mm |
(2.36") |
|
110 mm |
|
|
55 mm |
(2.16") |
|
| |
|
Set-Screw Locking System --- for Super Low-Profile installation
|
| |
|
|
|
Step 1:
|
|
To loose
Apply the 5 mm hex key wrench to loose the Set-Screw by counter-clockwise.
|
| |
|
|
|
Step 2:
|
|
To adjust height from top
Use the 4 mm hex key wrench, Stretch trough the Set-Screw, Insert at hex hole at top of the Pedestal, then adjust height.
|
| |
|
|
|
Step 3:
|
|
To fasten
After Step 2 height adjustment, apply the 5 mm hex key wrench to lock by clockwise.
|
|
|
|
|
|
5 mm
hex-key wrench
|
|
Step 1 and 3: to loose and lock Socket-Set-Screw from above
|
| |
|
|
|
|
|
|
|
4 mm hex-key wrench
|
|
Step 2: to adjust height from top
|
|
|
|
cs1000a-40 to install at 40 mm high
35 mm clearance within Cable Trenches
|
|
|
Renovation jobs: Installing on the old, embed floor trunkings
|
 |
|
| |
|
|
|
|
|
|
|
|
|
Netfloor,
Inc. All Rights Reserved. |